Installation Of The Motor & Proper
Alignment Of The Motor:
1. The above picture shows the Motor, Belt, & rear tire in proper
alignment. Each scooter will be inspected for proper alignment of
these parts. You will also inspect to make sure that the sprocket
on the MOTOR does not touch the side of the frame.
2. If possible try to make sure that the belt is also in the center
of the MOTOR sprocket. This may not be possible in all cases if
we are using the new 250-watt motor due to the increased size in
the motor. If the belt cannot be centered on the Motors sprocket
you do not need to stop production on the scooter.
|