Part 2: Scooter frame with holes for ignition / charging
socket & extra hole:
The picture below is the incorrect frame for our scooter. We do
not use this frame.
1. The above picture is incorrect. The frame of the scooter should
never have 3 holes in the side of the frame. All frames for the
model X-11 scooter will only have 2 holes installed in them. The
hole on the left is for the 2 prong charging socket and the hole
on the right is for the key ignition. The hole on the top used to
be for our old fuse holder. We no longer use this type of fuse holder
and the hole on the top should never be on our scooter. If you see
this 3rd hold please please stop production until it is fixed properly.