Properly Adjusted Brake Handle:
1. Above is a picture of a properly adjusted brake handle.
2. The inspector will check each scooter to insure that the tension
on the brake handle is proper. This will insure that when the scooter
is shipped from the factory that the brake will be properly adjusted.
3. The brake handle should feel tight when pulled to the point shown
in the above picture. If the brake handle pulls easily all the way
to the handle bar grip then the brake is not properly adjusted and
the inspector will stop production on that scooter until the brake
handle is properly adjusted.
4. This brake adjustment is VERY important. Each scooter must be
tested always.
|