Inspection Of The Tube After It Is Installed In The Front &
1. The above picture shows a picture of the front wheel. This picture
has the tube valve stem properly installed.
2. Each scooter wheel (front wheel & rear wheel) will be checked
to make sure that the tube valve stem is properly installed just
like the above picture. If you find any tires with the tube valve
stem not properly installed you will request that a new wheel be
used on that scooter.
3. This is very important. If the tube is not properly installed
after only a few Kilometers of use on the scooter the tube will
tear at the valve stem causing a flat tire for the user of the scooter.
Each tire must be inspected by you.